1, the erection of the painting box:

The first is that the painting box rear side up, flat on the grass and other non rigid objects above the main rod part of lift back, remember not to lift the main rod side of the connecting support, it will easily lead to foot can not complete the open, and then expand all hind legs;

Then the foot time side pull out, let the side of the buckle on foot from falling off the box, and then fully expanded leg, finally remember to put the leg pressed on the side of the box slot, so that later in the box when not sliding bearing.

Finally, the whole box 180 degrees turn over, you can let the box of the three feet on the ground.

2, height adjustment:

The painting of the painting frame height and height, we need to adjust the time in painting, painting box height, is very simple, is to adjust the picture box on the feet of two level lifting screw, and then remember firmly grasp the regulated feet, people to maintain the flat box, not down, action slow.

In order to lower, can put the feet to the bottom side all shrink after the rear section, to turn to the water on the ground is the lowest foot painting box.

You can also put away all the paint box all feet placed on the table as a desktop, desktop with easel.

3, the fixed frame:

The picture frame range card adjustment device, the opening size is slightly larger than the height of the frame, then put the frame, finally locking, if more than the height of the picture frame height, can also be directly to the card drawing device rose to the highest, then directly on the frame drawing board painting device.

Adjusting the inclination, adjust the picture box on the side of the support cover screw tightening, and then after the exhibition open to their needs, you can fix the screws, such as painting need forward function, also used this method to achieve the main.